8 Channel Alarm Board

Midas Gold

8 Channel Alarm Board

Midas Gold
Register for exclusive wholesale prices

The Midas 8 channel alarm board will give the appearance that a PTZ is being monitored even when it’s not. Once the PTZ has been programmed to move to the area that has been triggered, the Midas board will send a signal each time an alarm has been triggered. This means that one PTZ can move from area to area when an alarm has been triggered recording each alarm area and helping an operator monitor each alarmed area much more efficiently. There is a volt free contact that will let you know that the board is powered up, so if there is a power failure this can be triggered to an alarm to let the operator know the board is no longer working.

  • Up to 8 alarm trigger inputs
  • Various Baud rates
  • Program board to talk to specific PTZ camera on the network
  • Switch between Pelco P and D
  • RS485 connections
  • Test switch for checking parameters of camera programmes
  • TERM Jumper pin = 120Ω terminating resistor to remove signal echo
  • 12V DC power with normally open and normally closed contact to indicate power or set an alarm should the board lose power

View File412-0060 Data Sheet    Size: (263.18 KB)
View FileStatement of Conformity    Size: (190.23 KB)

Call now for your free catalogue

  • Over 10,000 products in stock
  • Next day delivery
  • Technical knowledge and customer support

Our full range of available products are featured in the latest version of our product catalogue.

Request catalogue
Online Catalogue