All Sandor beams are sold in pairs and available in wireless and hard wired versions. Beams sets are available in various lengths from 60cm up to 250cm for wireless and 50cm to 400cm for wired.
The number of IR transmitters and receivers required can also be specified. Beams can be crossed or parallel – please refer to information guide for minimum distances.
Installation is quick and easy with Politec’s unique SMA (Single Man Alignment) technology using simple audible and visual set up. The receiving beam employs a buzzer and high visibility LED when the transmitting beam is aligned. An infrared filter is included with all Sandor beam sets for fine tuning.
Sandor beams can be mounted on a gate or wall using the enclosed wall mounting kit. Beam sets can also be mounted on a 1m or 2m pole. These poles are zinc coated – SAN/TB1 or SAN/TB2. A pole mounting kit will be needed for this application - SAN/PL
Full protection is provided covering alarm, tamper, low battery and fog alert.AND/OR gating is employed on all beams and response and output functions can be set using dip switches.
Detection range is 100 metres. Recommended cable is 7208S 8 Core Screened Alarm Cable or2 Core 0.5mm 2 Core Mains Flex depending on the physical environment.
- Triple Quad Beam
- IP65 rated.
- 60mm (W) x 60mm (D) x 1500mm (H)
- 24Vac (Heater)
- 100m External (Black)
- 400m Internal (Black)
- Parallel & Crossed Beams
- 4 Channels
- Pulsed 950nM Beams
- Tamper Switch