Genesis 1 is a versatile PIR detector that uses sophisticated signal processing and optics to minimise nuisance alarms caused by the sun, shadows and reflections. Genesis 1 Hardwired (LGHW) is powered from an external 12 volt power supply. There are two optically isolated relay contacts that provide alarm and tamper.
Luminite Genesis Hard Wired PIR Vertical Curtain 12m x 90 Degree
Genesis 1 is a versatile PIR detector that uses sophisticated signal processing and optics to minimise nuisance alarms caused by the sun, shadows and reflections. Genesis 1 Hardwired (LGHW) is powered from an external 12 volt power supply. There are two optically isolated relay contacts that provide alarm and tamper.
Luminite Genesis Hard Wired PIR Horizontal Curtain 12m x 90 Degree
Genesis 1 is a versatile PIR detector that uses sophisticated signal processing and optics to minimise nuisance alarms caused by the sun, shadows and reflections. Genesis 1 Hardwired (LGHW) is powered from an external 12 volt power supply. There are two optically isolated relay contacts that provide alarm and tamper.
Luminite Genesis Wireless Internal IP44 Heat Sensor
ALERTEX wireless heat and smoke detectors have been specially designed to work with ALERTEX wireless fire alert call points to provide a full fire alarm system for evolving construction sites.
Luminite 100 Double Sided Genesis Beam Tower
Luminite Genesis Beam Towers and Tower Base n
- BSAX-WMT (810-0078): Single sided wall mount 1.7m beam tower. Will accept two beam heads in any combination.
- BSAXBT (810-0079): Double sided free standing 1.7m beam tower. Will accept four beam heads in any combination.
- BSTF (810-0080): Tower Base: For use with the BSAXBT tower when the ground is soft.
n
Luminite 100 Single Sided Genesis Beam Tower
Luminite Genesis Beam Towers and Tower Base n
- BSAX-WMT (810-0078): Single sided wall mount 1.7m beam tower. Will accept two beam heads in any combination.
- BSAXBT (810-0079): Double sided free standing 1.7m beam tower. Will accept four beam heads in any combination.
- BSTF (810-0080): Tower Base: For use with the BSAXBT tower when the ground is soft.
n
Luminite 100 Genesis Beam Tower Base
Luminite Genesis Beam Towers and Tower Base n
- BSAX-WMT (810-0078): Single sided wall mount 1.7m beam tower. Will accept two beam heads in any combination.
- BSAXBT (810-0079): Double sided free standing 1.7m beam tower. Will accept four beam heads in any combination.
- BSTF (810-0080): Tower Base: For use with the BSAXBT tower when the ground is soft.
n
Luminite Genesis Wireless Remote Set/Un-set Key Point
With all Remote Monitored systems, it is a requirement that the system should be set and un-set. Conveniently this is provided using a key point at the entrance and exit of the site. In order to achieve this there is normally a great deal of civil works to be done which can be costly in time and money.
Luminite Easyswitch Wireless Transmitter for HVAC
Specially designed for retro control of HVAC systems the EST4HC is the ideal wireless solution where mains cabling is difficult or impractical. It is mains voltage powered and designed so that it can easily interface to various control devices that have mains signal outputs. With four inputs this product is designed to work with the EasySwitch single (ESR.1) or four circuit (ESR.4) receivers to allow remote control of up to four electrical circuits within a building or from one building to another.
Luminite Alertex IP Bridge
The Alertex Bridge connects Alertex Lockdown or Fire products to a local network allowing the system to be remotely monitored from one central location. When the Bridge is installed, users can see what Alertex units have been activated, re-set the system and inform key personnel of events via email or text.
Luminite Genesis Transmitter Module 12V (for other devices)
The LGTX434 transmitter module enables other detection products to interface with the Genesis Wireless system such as Active Infra Red Beams and Door Contacts.The module is powered from batteries and has a special regulator that maintains optimum performance even when the batteries have run down. When used with battery beam sets, the LGTX434 will report the battery status of the beam set. Just like the LGWP detectors, this transmitter module polls every minute to inform the system that it is still operational and to advise the battery condition. Available as 12 volts, 4.5 volts or 3 volts.
Luminite Genesis Hand Held Walktester
The Genesis Walk Test Instrument is an invaluable tool when it comes to setting up and testing a wireless PIR system. An LCD shows PIR information such as Detection, Tamper, Cloak, Shock and re-orientation. In addition it shows ID number, Lens type, Pulse count setting, signal strength and battery condition. Each detection or tamper is accompanied by an audible bleep. In addition, the display can also show an alpha numeric name for each PIR which makes identification easier. The walk tester will receive signals directly from the PIR detectors for fast accurate set up of the detection zones but the main advantage is when it receives the signals via the Masthead. This feature is unique and enables the installer to verify that the masthead receiver is receiving and that the signal strength at the masthead is sufficient. This walk tester can also transmit to simulate a PIR in order to check proposed PIR positions before installation begins.
