Description
Key Features: n
- Arm slides in for servicing enabling installation in locations where arm is not able to be rotate in
- Arm runs oylon 66 rollers for smooth operation
- Front support roller for parapet supplied as standard
- Solid constructions means stable platform for camera mounting
- Designed to enable man handling through lift and stairwell for roof access
- Standard 101.6 PCD camera mount fixing holes
- Available as flat parapet or corner parapet mount
n
nTechnical nMax. load capacity n
- Camera load using the front support roller = 25kgs / 0.25m2
- Camera load without front support roller = 15kgs / 0.15m2
- For arm lengths of over 2m, camera load depends on application
n
n
Construction and finish
n
- n
Produced in high tensile steel
- n
Hot dip galvanised for longevity
- n
Fixings are stainless steel grade A2 and galvanised grade 8.8
- n
Painted?finish to BS & RAL colours on request
n
nNotes on parapet mounting n
- Parapets must be of solid construction, ideally pre-cast concrete or steel-framed
- For brick built parapets, single skin construction is not suitable
- Parapets where the brickwork is not in good condition are not suitable
- The minimum parapet height is 1100mm
- The product head load must not be exceeded
- In cases where a greater head load is proposed, Altron must be contacted and suitable advice should be sought regarding parapet construction and strength
n