Description

Key Features: n

• Arm slides in for servicing enabling installation in locations where arm is not able to be rotate in
• Arm runs oylon 66 rollers for smooth operation
• Front support roller for parapet supplied as standard
• Solid constructions means stable platform for camera mounting
• Designed to enable man handling through lift and stairwell for roof access
• Standard 101.6 PCD camera mount fixing holes
• Available as flat parapet or corner parapet mount

n

nTechnical nMax. load capacity n

• Camera load using the front support roller = 25kgs / 0.25m2
• Camera load without front support roller = 15kgs / 0.15m2
• For arm lengths of over 2m, camera load depends on application

n

n

Construction and finish

n

• n
  Produced in high tensile steel
• n
  Hot dip galvanised for longevity
• n
  Fixings are stainless steel grade A2 and galvanised grade 8.8
• n
  Painted?finish to BS & RAL colours on request

n

nNotes on parapet mounting n

• Parapets must be of solid construction, ideally pre-cast concrete or steel-framed
• For brick built parapets, single skin construction is not suitable
• Parapets where the brickwork is not in good condition are not suitable
• The minimum parapet height is 1100mm
• The product head load must not be exceeded
• In cases where a greater head load is proposed, Altron must be contacted and suitable advice should be sought regarding parapet construction and strength

n